Edimax-technology IC-1500 User Manual download pdf (Page 11)

6.1.3. Network Setting

Network Setting

Internet

Camera Name

The default camera name is “IC1500WG”. It is recommended to name a meaningful name for

the camera.

IP Address

Enter an unused IP Address within the IP address range used on your LAN. If the IP Address of

your LAN is from the 192.168.2.1 to 192.168.2.254, you can set an unused IP Address from the

range for the camera, for example: 192.168.2.250.

Subnet Mask

The Subnet Mask field must match the subnet setting on your LAN. For example: 255.255.255.0.

Gateway

The Gateway is used to forward frames to destinations in a different subnet on the Internet. The

Gateway setting must be the same with the gateway used by the PCs on your LAN.

DNS Server

DNS Server (Domain Name Server) that translates names to IP addresses. Set the same DNS

Server as the PCs on your LAN.

Network Setting

Video Port

The Video Port is used to transmit or receive the video streaming in the network. The default port

setting is “4321”. If you want to view the video from the camera, the port setting should be

correct.

Web Port

This camera support web connection, the default web port is 80. Since the web server may use

port 80, you can use a different port for the camera. If you change the web port from 80 to 8080,

you must type http://192.168.2.3:8080

to connect the camera through the web browser.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 40 41

No comments

Edimax-technology IC-1500 User Manual Page 11