Edimax-technology PS-1210Un User Manual download pdf (Page 110)

101

You can enable/disable the wireless function and set

parameters that are used for the wireless stations to

connect to this print server from here. The parameters

include “Function”, “Mode”, “ESSID” and “Channel

Number”. You can manually set the parameters of

wireless LAN in this page or use the “Site Survey”

function to automatically search for an available access

point and associate with it.

Function is for user to disable, enable or let the print

server auto select to connect to the wired or wireless

network.

Auto – “Auto” is the default setting of the print server. At this mode,

the print server will automatically decide to enable or disable the

wireless function. When the print server starts up, it will auto-detect if

the LAN port is connected to an active network by an Ethernet cable.

If this is the case, the print server will run in Ethernet mode. If the

print server is not connected to an active network by Ethernet cable,

the print server will run in wireless LAN mode.

Users can plug the Ethernet cable to the print server at the first, after

configuring the print server features and wireless settings; they can

unplug the Ethernet cable to enable the wireless connection. It makes

the configuration much easier without creating the wireless

connection in advance.

Note: After you have set the wireless function, please remove

the Ethernet cable and then re-plug the power jack of the print

server to activate the wireless connection.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 158 159

No comments

Edimax-technology PS-1210Un User Manual Page 110