Edimax-technology PS-1210Un User Manual download pdf (Page 75)

You can configure the print server to automatically get IP

from DHCP server or manually specify static IP. The print

server also has a built-in DHCP server. You can enable

this DHCP server and let it manages IP for you.

Click the “IP” button to enter the IP setting page. If you

need the print server to automatically get an IP from

DHCP server, select “Auto IP”. You also can select “Static

IP” to manually assign “IP Address”, “Subnet Mask” and

“Gateway” for the print server.

Click the “DHCP Server” button to enter the DHCP

server’s setting page. You can “Enable/Disable” the DHCP

server or set “Auto” and assign a range of IP addresses

here. The DHCP server is disabled by default. If Auto is

selected, the DHCP Server of print server will be enabled

only when there is no other DHCP Server within the

network. When “Enable” or “Auto” is selected, you have

to configure “Starting Address”, “Range”, “Subnet Mask”,

“Gateway” and “DNS”. The print server will assign a

unique IP for each client.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 158 159

No comments

Edimax-technology PS-1210Un User Manual Page 75